ERO100 controllers are the complete solution to your small RO plant.This controller controls the Raw water pump, High Pressure pump,Dosing Pump and Flushing Solenoid. It also has a built-in conductivitymeter. The controller also takes in inputs from key sensors like LP switch, HP switch, Product level switch, and a user defined trip input. The controller also continuously monitors phase voltages, phasecurrents and imbalances. This ensures that your plant trips forunbalanced voltages or excessive currents. These controllers come in compact 96x96x110mm panel mount enclosure and have builtin relays to drive upto 5HP High pressure pumps. Clear LED indication combined with process status indicates the plant status and alarm conditions. This easy to use controller is a must forall your small RO plants.
Single Phase Prevention
3 Digit LED display with status / timer indication
LP Switch, HP Switch, Product Low/High and User Trip Inputs
Built-in Conductivity meter / controller
Timings programmable at site
No external contactors required upto 5Hp
Automates LP, HP, Flushing
96x96x110mm Panel mount enclosure
Specification |
||
|---|---|---|
| Indication | : | 3 Digit LED display |
| Indication Parameter | : | Phase Voltages, Phase Currents,Plant Status, Trip Parameters, |
| Time in current State and Conductivity | ||
| Alaram | : | Low Pressure, High Pressure, High/Low Voltage / Current, |
| Product Low/High, Conductivity and | ||
| optional additional 1 digital input | ||
| Programming | : | Using 4 keys in the front panel |
| Indiacation Accuracy | : | +- 2% of full scale |
| Operating Temperature | : | 0 to 50 Deg C |
| Storage Temperature | : | -40 to 85 Deg C |
| Humidity | : | 5-90% RH non-condensing |
| Relay Output | : | 3 Standard, 6 Maximum |
| Relay Contact Rating | : | 5A, 220V AC Maximum> |
| Housing | : | ABS face with MS Powder coated rear |
Power Consuption |
||
| Voltage | : | 4400VAC +-15% or 220V AC (Factory set only) |
| Frequency | : | 50/60 Hz |
| Power Consuption | : | Less than 2 Watt |
Optional Feature |
||
| Conductivity | : | 0 to 400 / 0 to 1000 uS/Cm (Factory set only) |
| HP Output Rating | :: | 3 Phase 10 Amps maximum per phase |