FT 200 - Paddle Wheel Flow Indicator
| Specification | ||
|---|---|---|
| Indication | : | 16 Character 2 line Alphanumeric LCD |
| Max. Operating Pressure | : | 10 Kg/cm2 |
| Power supply | : | 220 VAC ± 15 %, 8-24V AC/DC (Factory Preset) |
| Power Consumption | : | 1 Watt maximum |
| Percentage Solids | : | 1% of fluid volume non abrasive, non magnetic, particle size not exceeding 100 |
| microns size in diameter and length | ||
| Flow Range | : | 0.5 – 5 m/sec |
| Max. Viscosity | : | 1 Centipoise |
| Max. Operating Temperature | : | 70 °C |
| Storage Temperature | : | 0 – 80 °C |
| Humidity | : | 0 – 80 non condensing |
| Accuracy | : | +- 1% of full scale |
| Relay Output | : | Optional |
| M.O.C | : | Transducer housing - Polypropelene, O Rings – Viton, Rotor – PVDF, Shaft – |
| PVDF /HastalloyC | ||
| Program Variables | : | Saved in non-volatile EEPROM. No battery backup necessary. Data retention 100 |
| years maximum | ||
| Communication | : | RS232/RS485 (Factory Settable) using MODBUS Protocol |
| Programming Method | : | From keypad provided in the instrument |
| Housing | : | Field mount (112 mm x 82 mm x 40mm), Panel mount (96mm x 96mm x 110mm) |
| PRECAUTIONS | ||
| a.Do not connect AC signals beyond the rated values to the unit. Irreparable damage will arise. | ||
| b.Instrument power supply tolerance is +-15% from the rated supply voltage. Variations beyond the stated limit may damage | ||
| theinstrument. | ||
| c.For Panel mount applications donot short sensor leads | ||
| d.For Panel mount models, connect sensor only to leads specified in the unit. Donot connect them to external power | ||
| supplies.Connecting to external power supplies may damage the sensors. | ||
| e.Moisture or temperature beyond the stated limits will damage the instrument | ||
