CWD 100 - Computerised Water Dispenser
| Specification | ||
|---|---|---|
| Power supply | : | 220 VAC ± 10 %, 12 – 24 VDC (Factory settable only) |
| Power Consumption | : | 1 Watt maximum |
| Indication | : | CFI 100 Series: 16 Character 2 Line Backlit LCD display |
| No of Channels | : | 1 |
| Signal Maximum | : | Reed Switch input: No potential on the inputs Open Collector input: Restricted to |
| 12V maximum output from the unit TTL Input: Restricted to 5V input from sensor | ||
| Pulse Frequency | : | 0 to 4Khz Maximum |
| Pulse Amplitude Protection | : | Protected up to 14 V Maximum Amplitude continuous |
| Output Power | : | 5V /12V DC Regulated at 750 mA peak maximum (no fuse provided) Factory |
| settable | ||
| Sensor Supply Regulation: | : | 10 % |
| Zero and Span | : | NA |
| Conversion Type | : | Pulse Totalization |
| Operating Temperature | : | 0 – 50 °C |
| Storage Temperature | : | 0 – 60 °C |
| Humidity | : | 0 – 80 non condensing |
| Program Variables | : | Saved in non-volatile EEPROM. No battery backup necessary. Data retention 100 |
| years maximum | ||
| Programming Method | : | From keypad provided in the instrument |
| Housing | : | Panel mount 96mm x 96mm x 110mm |
